Get FREE Amazon Products

How To Fix A "Broken" Hoverboard By Re-Calibrating - Easy Hoverboard Troubleshooting


via IFTTT

16 comments:

  1. what if the red light wont stop flashing and only one light on the board is working

    ReplyDelete
  2. what if the red light wont stop flashing and only one light on the board is working

    ReplyDelete
  3. I re-calibrated and my hands were on the black foot sensors, now my hover board isn't moving. It turns on, but it's like the sides are dead. Normally when you turn on the headlights flash, but mine stay on...can you help?

    ReplyDelete
    Replies
    1. Some people say if you touch or press on the foot pads while calibrating the board it will fry both gyros. You can pickup two new gyros and a whole part kit for $47 here http://s.click.aliexpress.com/e/aMNVrZfAa

      Delete
  4. Replies
    1. GLad it worked. Thanks for checking out the site.

      Delete
  5. I have banged my hoverboard a couple of times and the bluetooth still would work. But later on it just won't connect and have the start-up noise. Please help!

    ReplyDelete
  6. Can you help with my bluetooth hoverboard. On start-up it won't make the sounds but works fine. I have banged a few times but after it would still play music. But later on it just takes time to pair and won't even pair... please help!

    ReplyDelete
  7. My hover board doesn't stop when I get off. It starts going all wacky and taking off and jumping around by itself. Even when I first press the button to turn it on one side starts going m. I've reset it plenty of times and it is still doing this. What should I do ?

    ReplyDelete
    Replies
    1. I was fixing a hoverboard for a friend that was doing a similar thing. It wound up bouncing up in the air as the wheel was spinning with noone on it. It hit me in the face and busted my lip open lol. It's typically caused by an air pocket. Here is one video showing how to fix it https://www.youtube.com/watch?v=ZQZWLhOMd_o. Go to my Youtube channel and do a search of my channel for the term "air pocket" and I have about 6 vidoes showing how to fix this.

      Delete
  8. I fell off my hoverboard and both lights were coming one green and one red so we tried to recalibrate several times and then both lights turned red and my hoverboard won't stop beeping and battery side tire is not rolling freely can anybody help me?

    ReplyDelete
  9. Same issue as Casey - Any help?????

    ReplyDelete
    Replies
    1. Most likely need a gyro. You can pick one up on Amazon amzn.to/1U4f11r

      Delete
  10. Same issue as Casey (above).... Any help???

    ReplyDelete
  11. Sounds like you need a new gyroscope. You can grab on here on Amazon. amzn.to/1U4f11r. When you tried calibrating it did you press the foot pad? If so you fried the gyro.

    ReplyDelete